Jupiter-BBB高镍铸铁焊条

Shield Metal Arc Welding(SMAW - Stick)

For all cast irons - meehanite, ductile, mealleable, gray cast irons, and steel to cast iron with excellent machinability.

适用于所有铸铁：Meehanite孕育铸铁、球墨铸铁、可锻铸铁、灰口铸铁，以及钢和铸铁的焊接，焊缝可加工性佳。

Features

亮点

Strength Up To 65,000 psi/448MPa

抗拉强度高达65,000 psi/448MPa

Non-Conductive Coating Eliminates Side Arcing

非导电涂层可消除偏弧

All positions

全位置焊接

Use In Tight Spots

可在狭窄部位使用

Good Arc Visibility

良好的电弧可见性

Great Weld Appearance

出色的焊缝外观

Soft Stable Arc

软稳定弧

Weld over Dirt and Oil

可在油污上直接进行焊接

Porosity Free

无气孔

Easiest cast iron rod to use

极易使用

Excellent Machinability 卓越的可加工性

Coating Will Not Overheat Even On AC 涂层即使在交流电下也不会过热

Characteristics

特点

Jupiter-BBB has a special non-conductive coating, which permits welding in tight spaces without side arcing. It produces fully machinable deposits and allows simple repair of defective, broken or worn castings, even in deep holes or out-of-position.

Jupiter-BBB has a soft stable arc and low-fuming characteristics that let the welder see and control the arc puddle.

Since Jupiter-BBB can generally be used without preheat, cast parts can often be repaired in place without disassembly.

Jupiter-BBB配有特殊的非导电涂层，可以在狭小的空间内进行焊接，而不会产生偏弧。它产生完全可加工的熔敷层，可以简单的对有缺陷、断裂或磨损的铸件进行修复，即使是在深孔或尴尬位置的情况下。

Jupiter-BBB具有柔软稳定的电弧和低烟雾特性，让焊工易于看到和控制电弧熔池。

由于Jupiter-BBB通常可以在没有预热的情况下使用，因此铸件通常可以在不拆卸的情况下进行现场修复。

Technical技术规格

Size and Amps AC/DC+(DCEP)

Best Practices Application 应用

Use medium arc and stringer beads.

使用中等电弧和线状焊道。

Skip weld to prevent overheating.

跳焊以防止过热。

Light peening recommended.

建议轻敲击。

Preheat critical or heavy parts to 500⁰F(260⁰C).

将关键或重型零件预热至500⁰F（260⁰C） 。

Cool slowly after welding.

焊后缓冷。