1. Melting tank, dispensing nozzle and manifold could be heated orderly to
avoid dispensing nozzle being over-heated and reduced carbonization of
HMA. Added the heater on the manifold to get on production on line, approx.
need heating time 15mins upon machine is power on.
全智能电控分段顺序加热，减少胶质碳化节省用电，增加胶路板快速热
熔热熔胶，开机加热15分钟左右，即可操作使用
2. Weekly timer for setting the time to turn on and off machine automatically by
requirements.
全周预约开关机功能—可依实际功能需求设定每天不同的开关机时间。
3. The function of keeping warm as a “Stand By” status to reduce carbonization
of HMA and to conbbbb to friendly environment.
智能停机保温功能—减少胶质碳化符合环保节能需求。
4. Extended glue transfer pipe to get more area for spraying.
喷头导管延长，有利于大鞋面喷涂操作
5. Constant flow by precision piston pump.
双动气压式泵浦---出胶稳定，使用寿命长
6. The heater is wrapped outside of the tank and there are the fins at the bottom of the tank to increase melting rate, distribute
heat evenly for less carbonization inside the tank.
特殊胶桶环抱式加温,底端太阳状传热片装置 ,充份且均匀加温.让热熔胶碳化几乎解除。
7. Three stage filter to reducing maintenance and glue path block.
三重过滤装置---减少管路阻塞，停工维修时间，有效提升生产效率。
8. Protective transbbbber to avoid getting damaged due to abnormal instant-voltage.
内置瞬间电压防护变压器(90~320V)，防止智能电子机板损坏。
9. 45% Improvement on energy efficiency design that is compared with traditional models. Reduce waiting time to get on
production line.
节能省电---特殊结构设计，减少电能消耗，比传统机型省电省胶45%。